IWIN-2701 Non-Nuclear Asphalt Density Gauge

◎ IWIN-2701 uses advanced electromagnetic technology to obtain accurate asphalt pavement density readings;

◎ No special radiation detection and certificate is required. It is light and easy to use;

◎24 hours of portable operation;

◎ Test density with general unit (Kg./M3);

◎ Adjust the asphalt temperature;

◎ Internal data logger can store 4000 readings;

◎ Can be downloaded to the computer at will.

1. Boot   Turn on the power switch on the left side, the backlight of the instrument's display will flash, and the internal buzzer will “drop”, then the instrument will start self-test and start.

2. Menu content    after booting, the instrument displays as follows:

 Main Menu-----Measurement Mode,

Calibration Mode,

View Data,

Data Delete,

Settings

Record: 5   Battery: 80%    Temperature: 24 ° C

【2019-10-10 13:30:12】

Use the up and down keys to select the corresponding function option. the specific functions are as follows:

<Measurement Mode> The measurement mode has three measurement modes: continuous measurement mode, single measurement mode, and average measurement mode.

<Calibration Mode> The calibration mode is divided into three calibration modes: normal calibration, one-point calibration, and two-point calibration.

3.Setting menu    use the <Up><Down> arrow to select the last <Settings> option, then press the Enter key to enter, enter the following interface：

Settings-----Set time,

Maximum theoretical density value (MTD),

Select road type,

Input road thickness, more...