U910 / U920 ultrasonic pulse velocity tester, use for structural concrete compressive strength, crack depth, crack width and defect detection;Diaphragm wall integrity testing, which integrates five functions of pile testing, ultrasonic rebound comprehensive method for strength measurement, defect detection, crack sounding and width measurement.Geological exploration, rock integrity, weathering evaluation test; mechanical properties of non-metallic materials such as rock mass and concrete.

The standard penetration test is an in-situ test that is coming under the category of penetrometer tests. The standard penetration tests are carried out in borehole. The test will measure the resistance of the soil strata to the penetration undergone. A penetration emphirical correlation is derived between the soil properties and the penetration resistance. The test is extremely useful for determining the relative density and the angle of shearing resistance of cohesionless soils. It can also be used to determine the unconfined compressive strength of cohesive soils.

Pile integrity tester is a test and analysis instrument for pile integrity testing and monitoring of precast pile driving process.Under impact or vibration load, the pile structure integrity and vertical bearing capacity of single pile are tested and analyzed.The purpose is to determine the bearing capacity of pile and the integrity of pile structure.

The steel protective layer measuring instrument is a portable non-destructive testing instrument, which can be used for the detection of the construction quality of reinforced concrete structures. It can measure the position of the steel bars on the concrete surface, detect the thickness of the steel protective layer and the diameter of the steel bars. In addition, the magnetic properties inside the concrete structure can also be The position of the body and the conductor are detected, such as the internal cable of the wall, the plumbing pipe, etc., and the detection before construction can effectively avoid damage to these facilities during construction and reduce accidents.

This series of testing machine is loaded by hydraulic pressure, and the electro-hydraulic servo control technology is used to conduct tensile, compression, bending, shear and other tests on metallic and non-metallic materials, showing a variety of curves, forces, deformation, displacement and other closed-loop control methods, which can be switched freely in the test. Automatic recording of stored data.

This series of testing machine is loaded by hydraulic pressure, and the microcomputer display manual control technology is used to perform tensile, compression, bending, shearing and other tests on metallic and non-metallic materials, showing a variety of curve, force, deformation, displacement and other closed-loop control methods, which can be switched freely in the test.Automatic recording of stored data.Can meet GB, 1S0, ASTM, DIN, JIS and other standards.