The integrated rebar detector is a portable non-destructive testing instrument, which can be used to test the construction quality of reinforced concrete structures. It can measure the position of rebars on the concrete surface, detect the thickness of the steel protective layer and the diameter of the rebar. In addition, it can also magnetize the inside of the concrete structure. The position of the body and the conductor are detected, such as the internal cable of the wall and the plumbing pipe. The pre-construction detection can effectively avoid damage to these facilities during construction and reduce accidents.
◎Style design, compact size, light weight, easy to carry, new upgrade wireless cloud transmission function, laser precise positioning of steel bar position;
◎Thickness detection mode is intuitive, showing thickness and steel spacing at the same time.
◎Thickness detection mode can automatically store thickness and spacing, which greatly improves the detection efficiency.
◎Waveform scanning mode shows the distribution of reinforcing bars intuitively, and it is more intuitive to detect and analyze dense reinforcing bars.
◎The waveform scanning mode also shows the thickness and spacing of the rebar protective layer.
◎It can detect the middle position of the two reinforcing bars, the aiming frame and the indication light, so as to facilitate drilling and coring.
◎The instrument automatically stores the calibration value, realizes fast measurement and avoids the trouble of each calibration.
◎Boundary-free mesh/profile scanning, the length of waveform scanning can reach 6m at a time.
◎TF card storage, large capacity, intuitive and convenient transmission;
◎2.8 inch high resolution color liquid crystal screen;
◎PC professional data analysis software, data processing and report generation can be easily completed.
Product Model
Rebar diameter setting range (mm)
Small range
Large range
±1（mm） ±2（mm） Maximum Allowable Error of Protective Layer Thickness ±4（mm） ±6（mm）
Applicable Scope of Diameter Estimation Maximum error of diameter indication Profile measurement function Mesh measurement function Waveform measurement function Probe self-calibration Host parameters
Data transmission mode Power supply storage capacity Working environment requirements
Other requirements | GTJ-R800
6mm~50mm
1~90mm
1~210mm
1~59mm 60~69mm 70~119mm 120~210mm
6mm~32mm Specification (+1) Support Support Support Support Screen size: 2.8 inch resolution: 240 x 320 Volume: 220 x 93 x 110 mm weight: 0.6 kg TF card, wireless cloud transmission (optional) lithium battery 2000 Components*1000 Measuring Points Temperature: -10 C to+40 C Humidity: <90% RH
There is no corrosive gas in the air. No strong electromagnetic interference. There should be no large vibration and shock. Instruments to avoid direct sunlight |
Product: R800 Integrated Rebar Scanner
Leading manufacturer of engineering quality testing instruments.
Add：Chenquan Development Zone Xianxian, Cangzhou city, Hebei Province, China
Mobile(whatsapp): +86-15613739777
Tel: +86-0317-8968107
Email: info@iwintesting.com
Copy @ IWINTESTING EQUIPMENT all rights reserved. Powered by HiCheng Privacy Policy
